Quantitative Relationships of Structure-Activity and Volume Fraction For Selected Nonpolar and Polar Narcotic Chemicals

Abstract

The relative toxicity of selected industrial organic chemicals was secured from the literature for the static 48-h Tetrahymena pyriformis 50% population growth impairment and the flow-through 96-h Pimephales promelas 50% mortality endpoints. Chemicals were selected to represent the nonpolar narcosis (aliphatic alcohols and aliphatic ketones) and polar narcosis (anilines and phenols) mechanisms of toxic action. molar volume (MV) and 1-octanol/water partition coefficient (log K _ow) data were generated for each chemical. High-quality, log K _ow dependent quantitative structure-activity relationships were observed for each chemical class and mechanism of action for both endpoints. The volume fraction (V _t) for each chemical in the target phase was determined from the toxicant concentration in the water (toxicity data), the MV, and the target/water partition coefficient (K _tw) with K _tw considered equal to K _ow ^(1-a). Analyses of target sites, by way of “a” revealed that “a” was constant for a mechanism of action regardless of chemical class, but distinct for a given test system. Mean V _t was constant for each mechanism of action regardless of chemical class or test system. These results suggest, at least for reversible physical mechanisms, that volume fraction analyses are significant in determining the mechanism of toxic action of a chemical.     

煤粉燃烧过程中灰膜形成比例实验研究

煤焦颗粒燃烧过程中,灰膜形成显著影响其燃烧特性。因此,本文借助高温沉降炉研究了61~75,75~90和90~125μm三种粒径黄陵烟煤在1273和1673 K温度下的燃烧特性与灰膜形成比例;借助扫描电镜(SEM)详细观测空心微珠颗粒内部结构,提出灰膜比例计算公式,并分析温度,粒径和碳转化率对灰膜比例的影响。结果表明,高温下大部分灰分在焦炭烧尽阶段以灰膜形式存在。灰膜比例随温度和碳转化率增加而增加,随煤粉粒径增大而减小。高温下灰分用于形成灰膜比例相对较高,这为煤焦燃尽阶段的低反应性提供了合理的解释。煤焦颗粒动态燃烧过程中灰膜形成比例随燃烧工况变化而变化。该研究为煤焦颗粒燃烧动力学模拟灰膜比例选择提供了关键数据支撑。     

Thermal analysis and FT‐IR studies of adsorbed poly(ethylene‐stat‐vinyl acetate) on silica

Adsorbed poly(ethylene‐stat‐vinyl acetate) (PEVAc) on fumed silica was studied using temperature‐modulated differential scanning calorimetry (TMDSC) and FT‐IR spectroscopy. The properties of the copolymers were compared with poly(vinyl acetate) (PVAc) and low density polyethylene (LDPE) as references. TMDSC analysis of the copolymer‐silica samples in the glass transition region was complicated for the copolymers because of the ethylene crystallinity. Nevertheless, examination of the glass transition region for small adsorbed amounts of these copolymers indicated the presence of tightly‐ and loosely‐bound polymer segments, similar to other polymers which have an attraction to silica. Compared with bulk polymers with the same composition, the tightly‐bound polymers showed an increased glass transition temperature (T_g) and a loosely‐bound fraction with a lower T_g than bulk. FT‐IR spectra of the surface copolymers indicated that the fraction of bound carbonyls (p) increased as the fraction of vinyl acetate in the copolymers decreased, consistent with the notion that the carbonyls from vinyl acetate preferentially find their way to the silica surface. Spectra from samples with different adsorbed amounts of polymer were used to obtain the amount of bound polymer (M_b) and the ratio of molar absorption coefficients of bound carbonyls to free carbonyls (X). The copolymers had very large p values (up to 0.8) at small adsorbed amounts and dependent on the composition of the polymer. However, an analysis of the bound fractions, based on only the vinyl acetate groups, superimposed the data, suggesting that the ethylene units simply dilute the vinyl acetate groups in the surface polymer. The sample with the smallest fraction of vinyl acetate did not show this behavior and may be considered to be “carbonyl poor.” © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 727–736     

Free mycophenolic acid determination in human plasma ultrafiltrate by a validated liquid chromatography–tandem mass spectrometry method

The aim of this study was to develop and validate fully the liquid chromatography–tandem mass spectrometry method for free mycophenolic acid (MPA) concentration measurements in plasma ultrafiltrate that will be reliable and simple in preparation with deuterated MPA (MPA‐d3) chosen as an internal standard. The chromatographic separation was made with Zorbax Eclipse XDB‐C18 column (4.6 × 150 mm) using a gradient of two solutions as a mobile phase: (A) water and (B) methanol, each containing 0.1% formic acid and 2.5 mm ammonium acetate. Satisfactory repeatability of retention times was achieved with average values of 7.54 ± 0.20 min and 7.50 ± 0.19 min for MPA and MPA‐d3, respectively. The method was selective, with no carry‐over or matrix effect observed. The analytical range was proven for MPA ultrafiltrate concentrations of 1–500 ng/mL. The accuracy and precision fell within the acceptance criteria for intraday (accuracy: 100.63–110.46%, imprecision: 6.23–7.76%), as well as interday assay (accuracy: 98.81–110.63%; imprecision: 5.36–10.22%). The method was used for free MPA determination in plasma samples from patients treated with mycophenolate mofetil. To the best of our knowledge this is the first liquid chromatography–tandem mass spectrometry method for free MPA monitoring using MPA‐d3 that allows to measure plasma ultrafiltrate concentrations as low as 1 ng/mL.     

Hausdorff measures and packing measures of limit sets of CIFSs of generalized complex continued fractions

ABSTRACT

We consider a certain family of CIFSs of the generalized complex continued fractions with a complex parameter space. We show that for each CIFS of the family, the Hausdorff measure of the limit set of the CIFS with respect to the Hausdorff dimension is zero and the packing measure of the limit set of the CIFS with respect to the Hausdorff dimension is positive (main result). This is a new phenomenon of infinite CIFSs which cannot hold in finite CIFSs. We prove the main result by showing some estimates for the unique conformal measure of each CIFS of the family and by using some geometric observations.     

Modelling effects of subgrid-scale mixture fraction variance in LES of a piloted diffusion flame

A posteriori analysis of the statistics of two large-eddy simulation (LES) solutions describing a piloted methane–air (Sandia D) flame is performed on a series of grids with progressively increased resolution reaching about 10.5 million cells. Chemical compositions, density and temperature fields are modelled with a steady flamelet approach and parametrised by the mixture fraction. The difference between the LES solutions arises from a different numerical treatment of the subgrid scale (SGS) mixture fraction variance – an important quantity of interest in non-premixed combustion modelling. In the first case (model I), the variance transport equation is solved directly, while in the second (model II), an equation for the square of the mixture fraction is solved, and the variance is computed from its definition. The comparison of the LES solutions is based on the convergence properties of their statistics with respect to the turbulence resolution length scale. The dependence of the LES statistics is analysed for velocity and the mixture fraction fields, and tested for convergence. For the most part, the statistics converge for the finest grids, but the variance of the mixture fraction shows some residual grid dependence in the high-gradient regions of the jet near field. The SGS variance given by model I exhibits realisability everywhere, whereas in regions of the flame model II is non-realisable, predicting negative variances. Furthermore, the LES statistics of model I exhibit superior convergence behaviour.     

Isotactic poly(p-fluorostyrene): Conformation and molecular packing analysis

The chain conformation and molecular packing of isotactic poly(p-fluorostyrene) have been examined using calculations made with semiempirical potential energy functions. Isolated chain conformational energies indicate no difference in conformation for the fluoropolymer from the conformation for isotactic polystyrene. The energy for packing poly(p-fluorostyrene) chains into a crystalline array as 3₁ or 4₁ helices was also compared with the energies for packing polystyrene in both of these helical forms. While not being the lowest energy mode of packing for poly(p-fluorostyrene), the packing of 4₁-helices does yield a local energy minimum. Such packing of 4₁ helical polystrene chains is considerably less energetically feasible. The results indicate the causes for the experimentally observed difference in the crystalline conformations of the two isotactic polymers as being due to intermolecular influences.     

INVESTIGATION OF A QUASI-STEADY LIQUID CRYSTAL TECHNIQUE FOR FILM COOLING HEAT TRANSFER MEASUREMENTS

A quasi-steady technique to simultaneously measure the local heat transfer coefficient and cooling effectiveness on surfaces involving film cooling situations is investigated. The method employs a composite slab consisting of a very thin laminate layer of low-thermal-conductivity material superposed upon a highly conductive metal substrate. The resulting heat transfer in the thin laminate is described by one-dimensional conduction. A very thin coating of thermochromic liquid crystals sprayed onto the surface of the laminate is used in conjunction with a computer image processing procedure to provide local surface temperature data. This information, combined with the substrate and mainstream gas temperatures, provides highly detailed (90 video pixels/cm²) local convection heat transfer distributions. The method is used to conduct flat-plate film cooling experiments consisting of a single row of discrete holes inclined at 35 to the mainstream flow. The local surface temperature is influenced by the combination of two interacting fluid streams at different temperatures. A numerical analysis was performed to assess the assumptions underlying the data reduction procedure. The experimental uncertainty of 7% in the heat transfer coefficient is comparable to prior studies. Furthermore, the uncertainty of 5% in the film cooling effectiveness, coupled with the negligible lateral conduction errors, indicates the present technique offers a unique capability for accurate measurement of the local film cooling effectiveness.     

A mass‐fraction‐based interface‐capturing method for multi‐component flow

An interface‐capturing method based on mass fraction is developed to solve the Riemann problem in multi‐component compressible flow. Equations of mass fraction with modified form, which is derived from conservative equations of mass, are employed here to capture the interface. By introducing mass fraction into Euler equations system, as well as other conservative coefficients, a quasi‐conservative numerical model is created. Numerical examples show that the mass fraction model performs well not only in multi‐component fluids modeled by simple stiffened gas equation of state (EOS) but also in that modeled by complex Mie–Grüneisen EOS. Moreover, the mass fraction model is applied to Riemann problem with piecewise EOS; the expression of which depends on density. It is found that the mass fraction model can well adapt to the analytic change in piecewise EOS and produce accuracy solutions with fewer unknown quantities, and the model can be easily extended to m‐component fluid mixture by using only m + 4 equations with no additional conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Closed-form solutions of general second order linear recurrences and applications

Two closed-form solutions of a general second order linear recurrence with variable coefficients are established. The first form is combinatorial in nature and is derived through the use of a set which counts the number of elements which are two units apart. The second form is closely related to continued fractions and is derived through the use of continued fraction-like relation. Several applications including a number of verifications of conjectures produced from the Ramanujan Machine are worked out, which illustrate its versatility in this respect.